3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050 .100 latch/ejector, pth & smt stra ight, pth right angle 810 series physical electrical environmental insulation material: high temperature plastic (lcp) flammability: ul 94v-0 color: black (rb plating only) or natural contact material: copper alloy plating underplating: 100 ? [ 2.54 m ] nickel wiping area: 30 ? [ 0.76 m ] gold solder tails: see ordering information terminal finish indicator: e3 (ref jesd97) marking: 3m logo, part number and orientation triangle current rating: 0.5 a insulation resistance: > 1 10 9 at 500 v dc withstanding voltage: 500 v rms at sea level temperature rating: -55 c to +105 c process rating: maximum 260 c (per j-std-020c) moisture sensitivity level: 1 (profile per j-std-020c) ts-0253-30 sheet 1 of 7 ? tripolarization to mating socket ?50 mil 100 mil halves th e connector length ? latch and eject for rugged high performance applications ? available for thru hole or surface mount attachment ? high temperature plastic ? four-wall shroud provides contact protection ? contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100 ? see regulatory informatio n appendix (ria) for chemical comp liance information date modified: march 26, 2007 ul file no.: e68080
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050 .100 latch/ejector, pth & smt stra ight, pth right angle 810 series ts-0253-30 sheet 2 of 7 .0 .00 .000 inch .1 .01 .005 [ ] dimensions for reference onl y tolerance unless noted [mm] inch ordering information notes: 1. this polarization bump does not exist on the 20 position header. 2. recommended to be mated to the .050 x .100 wiremount socket 820 series. ejector latch long 3505-28 (natural) 3505-28b (black) short 3505-29 (natural) 3505-29b (black) ejector/latch system: 0 = none 5 = with short ejectors installed 6 = with long ejector latches installed contact tail: 2 = solder tail for .062 [ 1.57 ] pc board 3 = solder tail for .094 [ 2.39 ] pc board 4 = solder tail for .125 [ .318 ] pc board contact quantity (see table 1) 81xxx-5x0x03-xx a b c .015 x .015 [0.38] x [0.38] see note 1 position 2 2x .092 [2.34] .310 [7.87] position 1 .050 typ [1.27] .100 ref [2.54] .015 x .015 [0.38] x [0.38] d position 1 orientation triangle .440 .010 [11.18] .620 ref [ 15.75 ] .405 [10.29] .265 [6.73] 2x ?.116 [2.95] .105 [2.67] .160 ref [4.06] .306 ref [7.77] ?f? (see table 2) .015 [0.38] .140 .010 [3.56] short latch long latch .165 .010 [ 4.19 ] .828 ref [ 21.03 ] plating suffix: blank = tin lead tails (ria e3 & c2 apply) rb = matte tin tails (ria e1 & c1 apply) table 2 pcb thickness ?f? solder tail length .010 .062 [15.7] .090 [2.29] .094 [2.39] .112 [2.84] .125 [3.18] .143 [3.63] abc d short ( ref. ) d long (ref.) 020 1.060 0.722 0.500 1.671 1.842 [26.92] [18.34] [12.70] [42.44] [46.79] 026 1.210 0.872 0.650 1.821 1.992 [30.73] [22.15] [16.51] [46.25] [50.60] 036 1.460 1.122 0.900 2.071 2.242 [37.08] [28.50] [22.86] [52.60] [56.95] 040 1.560 1.222 1.000 2.171 2.342 [39.62] [31.04] [25.40] [55.14] [59.49] 050 1.810 1.472 1.250 2.421 2.592 [45.97] [37.39] [31.75] [61.49] [65.84] 060 2.060 1.722 1.500 2.671 2.842 [52.32] [43.74] [38.10] [67.84] [72.19] 068 2.260 1.922 1.700 2.871 3.042 [57.40] [48.82] [43.18] [72.92] [77.27] 080 2.560 2.222 2.000 3.171 3.342 [65.02] [56.44] [50.80] [80.54] [84.89] 100 3.060 2.722 2.500 3.671 3.842 [77.72] [69.14] [63.50] [93.24] [97.59] table 1 contact quantity dimensions pth right angle header
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050 .100 latch/ejector, pth & smt stra ight, pth right angle 810 series table 3 ejector latches dimension e min none .575 [14.61] long 1.010 [25.65] short .885 [22.48] ts-0253-30 sheet 3 of 7 notes: 1. recommended to process pc boards through the solder bath such that the connector enters end first (two solder tails at a tim e). this will help prevent solder bridging. 2. a dummy or solder thief solder pad at the end of each row is recommended on the bottom or solder side of the pc board in order to help prevent solder bridging on the end solder tails. the solder thiefs are only required on the end of the rows which leave the solder bath last. 3. in order to facilitate soldering it is recommended that ejector latches be installed after the soldering process. *solder thief solder pads (see note 2) .050 .002 [1.27] .100 .002 [2.54] .045 - .060 [1.14] - [1.52] .025 - .035 [0.64] - [0.89] *solder thief solder pads required only on solder side of pc board. view a ?.024 .003 typ [0.64] .050 .002 typ [1.27] tolerance noncumulative flow solder direction position 2 position 1 .100 .002 [2.54] 2x ? .109 .002 [2.77] ?.024 .003 typ [0.64] recommended mounting hole pattern, pth right angle header (shown for mounting side of pc board) c .002 e .025 .002 [0.64] .355 max [9.02] .305 min [7.75] .160 .002 [4.06] view a
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050 .100 latch/ejector, pth & smt stra ight, pth right angle 810 series ts-0253-30 sheet 4 of 7 a b see note 1 position 2 .310 [7.87] position 1 .015 x .015 [ 0.38 ] x [ 0.38 ] .050 typ [1.27] .100 ref [2.54] .265 [6.73] .140 .010 ?f? (see table 2) .100 [2.54] ordering information 81xxx-6x0x0x-xx ejector/latch system: 0 = none 5 = with short ejectors installed 6 = with long ejector latches installed contact tail: (see table 2) 2 = solder tail for .062 [ 1.57 ] pc board 3 = solder tail for .094 [ 2.39 ] pc board 4 = solder tail for .125 [ .318 ] pc board contact quantity (see table 4) board mounting options: 1 = none 3 = press fit posts both ends pth straight header notes: 1. this polarization bump does not exist on the 20 position header. 2. recommended to be mated to the .050 x .100 820 series socket. pcb thickness "f" solder tail length .010 .062 [15.7] .090 [2.29] .094 [2.39] .112 [2.84] ta b l e 5 ejector latch long 3505-28 (natural) 3505-28b (black) short 3505-29 (natural) 3505-29b (black) plating suffix: blank = tin lead tails (ria e3 & c2 apply) rb = matte tin tails (ria e1 & c1 apply) 020 1.060 [26.92] 0.722 [18.34] 1.671 [42.44] 1.842 [46.79] 0.860 [21.84] 026 1.210 [30.73] 0.872 [22.15] 1.821 [46.25] 1.992 [50.60] 1.010 [25.65] 036 1.460 [37.08] 1.122 [28.50] 2.071 [52.60] 2.242 [56.95] 1.260 [32.00] 040 1.560 [39.62] 1.222 [31.04] 2.171 [55.14] 2.342 [59.49] 1.360 [34.54] 050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.592 [65.84] 1.610 [40.89] 060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.842 [72.19] 1.860 [47.24] 080 2.560 [65.02] 2.222 [56.44] 3.171 [80.54] 3.342 [84.89] 2.360 [59.94] 100 3.060 [77.72] 2.722 [69.14] 3.671 [93.24] 3.842 [97.59] 2.860 [72.64] table 4 contact quantity dimensions a b c short (ref.) c long (ref.) d
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050 .100 latch/ejector, pth & smt stra ight, pth right angle 810 series ts-0253-30 sheet 5 of 7 .0 .00 .000 inch .1 .01 .005 [ ] d im ensions for r eference onl y tolerance unless noted [m m ] inch 1. recommended to process pc boards through the solder bath such that the connector enters end first (two solder tails at a time). this will help prevent solder bridging. 2. a solder thief solder pad (dummy pad) at the end of each row is recommended on the bottom or solder side of the pc board in order to help prevent solder bridging on the end solder tails. the solder thiefs are only required on the end of the rows which leave the solder bath last. 3. in order to facilitate soldering it is recommended th at ejector latches be installed after the soldering process. view a 2x .205 .003 [5.21] .050 .002 typ [1.27] tolerance noncumulative flow solder direction .160 min [4.06] .050 .003 [1.27] .100 .002 [2.54] .225 min [5.72] .100 .002 [2.54] 2x ? .109 .002 [2.77] recommended mounting hole pattern, pth vertical header d .002 e ? .025 .003 typ [0.64] view a (shown for mounting side of pc board) .050 .002 [1.27] ? .025 .003 [0.64] .100 .002 [2.54] .045 - .060 [1.14] - [1.52] .025 - .035 [0.64] - [0.89] *solder thief solder pads required only on solder side of pc board. view a *solder thief solder pads (see note2) table 6 ejector/latches dimension e (min) none .215 [ 5.46 ] long .650 [16.51] short .525 [13.34] note:
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050 .100 latch/ejector, pth & smt stra ight, pth right angle 810 series ts-0253-30 sheet 6 of 7 .0 .00 .000 inch .1 .01 .005 [ ] d im ensions for r eference only tolerance unless noted [mm] inch ordering information smt straight header ejector/latch system: 0 = none 5 = with short ejectors installed 6 = with long ejector latches installed board mounting options: 1 = none 4 = press fit post mount at position 1 end 7 = metal retention clips 8 = #1 end press fit post & metal retention clips contact quantity (see table 7) 81xxx-6x0c0x-xx-xx packaging options: blank = trays wx = tape & reel package (see table) notes: 1. this polarization bump does no t exist on the 20 position header. 2. recommended to be mated to the .050 x .100 820 series wiremount socket. a b .015 x ..015 [0.38] x [0.38] see note 1 position 2 .310 [7.87] position 1 .050 typ [1.27] .100 ref [2.54] .346 .010 [8.79] .140 .010 [3.56] .265 [6.73] position 1 orientation triangle .440 .010 [11.18] .620 ref [15.75] d .165 .010 [4.19] short latch long latch .092 [2.34] optional single press fit post mount/alignment feature ? .116 [2.95] optional metal clip retention .015 [0.38] .405 [10.29] .828 ref [21.03] .080 [2.03] ejector latch long 3505-28 (natural) 3505-28b (black) short 3505-29 (natural) 3505-29b (black) plating suffix: blank = tin lead tails (ria e3 & c2 apply) rb = matte tin tails (ria e1 & c1 apply) ab d short (ref.) d long (ref.) tape & reel suffix 020 1.060 0.722 1.671 1.842 [26.92] [18.34] [42.44] [46.79] 026 1.210 0.872 1.821 1.992 [30.73] [22.15] [46.25] [50.60] 036 1.460 1.122 2.071 2.242 [37.08] [28.50] [52.60] [56.95] 040 1.560 1.222 2.171 2.342 [39.62] [31.04] [55.14] [59.49] 050 1.810 1.472 2.421 2.592 [45.97] [37.39] [61.49] [65.84] 060 2.060 1.722 2.671 2.842 [52.32] [43.74] [67.84] [72.19] 068 2.260 1.922 2.871 3.042 [57.40] [48.82] [72.92] [77.27] 080 2.560 2.222 3.171 3.342 [65.02] [56.44] [80.54] [84.89] 100 3.060 2.722 3.671 3.842 [77.72] [69.14] [93.24] [97.59] table 7 contact quantity dimensions wd wf wg we wh
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050 .100 latch/ejector, pth & smt stra ight, pth right angle 810 series ejector latches dimensions h min no .775 [19.69] short 1.085 [27.56] long 1.21 [30.73] no. of positions dimensions f g 20 .450 [11.43] n/a 26 .600 [15.24] .025 [0.64] 36 .850 [21.59] n/a 40 .950 [24.13] n/a 50 1.200 [30.48] .025 [.64] 60 1.450 [36.83] 0.000 68 1.650 [41.91] 0.000 80 1.950 [49.53] 0.000 100 2.450 [62.23] 0.000 ts-0253-30 sheet 7 of 7 recommended mounting hole pattern, smt straight header (shown for mounting side of pc board) .050 .002 typ [1.27] tolerance noncumulative 2x .075 .002 [1.09] .205 .003 [5.21] .376 [9.55] .280 [7.11] h optional drilled hole for plastic post ? .109 .002 [2.77] .220 .003 [5.59] .158 .002 [4.01] see detail a f .029 .001 [0.74] position 2 .110 .002 [2.79] position 1 c l c l c l c l g ? .065 .002 typ [1.65] typ, full r detail a optional plated thru hole for metal clip retention ? .042 .003 typ (plated thru hole) [1.07] note: in order to facilitate soldering it is recommended t hat ejector latches be installed after the soldering process.
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/17/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. ria-2217-a
china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs 2 0 electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. name and content of hazardous substances or elements 3 electronic solutions division 6801 river place blvd. austin, tx 78726-9000 800/225-5373 www.3m.com/interconnects ria-2217-a ? 3m 2007
|
